Collection: Products

28" probe, 5/16" diameter, 7-ft Teflon-lined hose, t max= 932°F (Use complete probe only)

28" probe, 5/16" diameter, 7-ft Teflon-lined hose, t max=1832°F

28" probe, 5/16" diameter, sintered filter, 7-ft Teflon-lined hose, t max=1832°F (Use complete probe only)

3 hose set with valve low loss 1/4" to 1/4"

3 hose set with valve low loss 1/4" to 5/16"

3 hose set without valve low loss 1/4" to 5/16"

3 hose set without valve low loss 1/4" to 1/4"

3.9' with 13' stainless braided TC lead, 8 pin connector

3010 MINIFID Portable Heated FID VOC Analyser - 3010 PURE

The 3010 MINIFID Portable heated FID VOC analyser is a small, self contained, and fully portable analyser. It is equally convenient for use on the laboratory...

315 NMHC Cutter

Signal Group’s 315 NMHC cutter provides the capability to measure methane and non-methane hydrocarbons only for clients with a standard heated flame ionisation detector (FID). An...

316 stainless steel housing incl ALERT / FIRE EARLY WARNING relay, 30 ft. sensitivity (latching alert and alarm...

316 stainless steel housing incl ALERT / FIRE EARLY WARNING relay, 30 ft. sensitivity (latching alert and alarm relays) Product family: FS10 Stand Alone (Unitized) Electro-Optical...

316 stainless steel housing incl ALERT / FIRE EARLY WARNING relay, 30 ft. sensitivity (non‑latching alert and...

316 stainless steel housing incl ALERT / FIRE EARLY WARNING relay, 30 ft. sensitivity (non‑latching alert and alarm relays) Product family: FS10 Stand Alone (Unitized) Electro-Optical...

32" flexible bead tip thermocouple, fiber glass sheating, tip Ø 1.5 mm, TC Type K, -58 to +752°F (usable with handle part no. 0409 1092)

320 Cutter

The 320 Cutter provides a low cost alternative to “all in one” FIDs with a built in cutter. Housed in a portable case suitable for inline...

340 Burner Tuner Kit - O2, CO, NO, Printer (for boilers & burners)

340 Engine Tuner Kit - O2, CO, NO, (for engines)

340 Standard Kit - O2, CO

340 Upgrade Kit - O2

36" x 36" fabric hood

360 – Heated pump/Filter/Dist. Oven

A medium duty heated Prefilter unit is installed in the 19″ Rack housing of the analysers. The Prefilter is fitted with a choice of either one...

363 Portable Heated Sample Pump/Filter

A light duty, portable heated pump and pre-filter unit for use with single heated instruments. Provides variable inlet pressures and sample flow rates for very low...

363SM – Heated Pre-Filter

The 363SM is a heated pre-filter which is installed close to the sampling point, providing a filtration of hot sample gas before allowing down the heated...