Collection: Products

Surface probe with sprung thermocouple strip, also for uneven surfaces, measurement range short-term to +500°C, TC type K, tip Ø 12 mm, probe Ø 5 mm x 115 mm, -76 to 572°F / -60 to +300°C, 3.9 ft / 1.2 m

SWG 100 BIOGAS Compact Analyzer

Stationary Biogas-measuring system for discontinuous measurements ; Cost effective stationary biogas analyzer ; Sampling from low suction up to high pressure gas ; Sample gas conditioning...

SWG 100 Biogas – Stationary Biogas Analyzer

Power up your biogas production with our stationary analyzer – 24/7 Monitoring, Always Reliable ; Available with and without UL/cUL certification ; Also available with UL/cUL...

SWG 100 CEM – Continuous Emission Monitor

Stationary Analyzer for Continuous Emission Monitoring ; up to 6 gas simultaneous measurement ; Advanced sample gas preparation for fast and reliable measurements ; Simple installation,...

SWG 100 SYNGAS EX- Analyzer

The stationary analyzer for continuous Syngas measurements in ZONE 2 for use in industrial safe or hazardous areas Zone 2, or in areas with increased safety...

SWG 100 SYNGAS – Analyzer

Designed for use in industrial safe areas or inside laboratories as well ; IP54 stainless steel cabinet, also for use in outdoor condition with sun and...

SWG 200 – Continuous Emission Monitor

Rugged, Low-Cost Industrial Gas Analyzer ; Use of optimized NDIR technology with improved accuracy and without zero offset ; Automatic calibration for up to 4 gas...

SWG 300 – Continuous Emission Monitor

Complete CEM system for emissions monitoring ; dual heat exchanger M&C Peltier gas cooler with double automatic condensate draining pumps ; Efficient sample gas filtration using...

System case (height: 130 mm) for instrument, probes and acce...

System case (height: 130 mm) for instrument, probes and accessories The testo 480 and its related probes have been discontinued, and have been replaced by the...

System case with double floor (height: 7") for instrument, probes and other accessories

T-handle food penetration probe, T/C type T, tip Ø 3.5 mm x 30 mm, probe Ø 5 mm x 115 mm, -58 to 662°F / -50 to +350°C, reinforced cable (PVC),

T-handle frozen food probe, TC type T, corkscrew tip Ø 4 mm x 30 mm, probe Ø 8 mm x 110 mm, -58 to 662°F / -50 to +350°C, 68 inch / 1.72 m cable w/2 male plugs

T-handle NTC frozen food probe, corkscrew design, tip Ø 8 mm x 110 mm length, (Tmax handle +158°F), -58 to +280°F

T-handle NTC penetration probe reinforced protection against buckling, tip Ø 5 mm x 115 length, PUR cable, -58 to +302°F

t190 Case 1 Assembly

TC type T flexible oven probe, tip Ø 1.5 mm, -58 to 482°F / -50 to +250°C, 6.5 ft / 2 m PTFE cable

TCA-5000 Hydrogen Gas Analyzer

Hydrogen Gas Analyzer TCA-5000 can be used for a variety of applications including research and development of catalysts, electrolytic cell for water electrolysis and medium and...

TECsoft

TECsoft integrates the testo 350, and the simplicity of Excel into the fastest and most flexible testing software program available.

Teflon sintered filter (21mm) diam.

Teflon sintered filter, Ø 12 mm, corrosive substances, high RH, high velocity.

Telescopic stand

Temperature clamp probe kit (NTC) - for digital manifolds

Temperature probe for U value measurement, triple sensor system, -4 to 158°F / -20 to +70°C, includes attachment putty

Temperature probe kit (no handle) - with air probe, immersion/penetration probe and surface probe (TC type K)